Principles of assessment in lifelong learning Essay

1.1Explain the types of assessment used in lifelong learning. (150 words approx.) Initial/diagnostic assessment can be taken before learner’s enrollment for a course. This is a way of finding out whether the prospective course is suitable for a student and meets the learner’s needs or not. Formative assessment can be taken during the programme or a course. Teachers use assessments in their teaching sessions to make judgement about their learners. Summative assessment is used to outline or work out the level of achievement. Summative assessment is used for a final judgement about the learning achievements. Formal assessment is used where there is a need to assess learners under controlled conditions. Informal assessment is used as an ongoing check on understanding without control conditions. This is an aid for a teacher to monitor progress. Independent assessment applies to courses where the learners are assessed by someone other than their teacher. Peer assessment is us ed where other learners are at the same level of skill and knowledge and can play a vital role in judging a learner’s achievement level. 1.2 Explain the use of methods of assessment in lifelong learning. (150 words approx.) Different methods can be used for assessment in the lifelong learning. Short answers: is a good way of keeping student activities in their learnings. Multiple –choice: is a task in which learner has to select the correct answer from a number of alternative options. Observation: Observation is used i this programme for assessment of micro-teach/ teaching practice delivery. It can be used in any situation where practical skills are being assessed. Project work: involves a piece of written work in which learners take responsibility. Essays: This is a substantial piece of written work as well. It asks learners to show understanding of the subject. Exams: can be taken either by written tests or completion of a practical task under controlled conditions. Oral and aural: These assessment test speaking and listening skills. In this assessment, learners are required to listen to something and respond . Electronic assessment: refers to the use of information technology for any assessment-related activity.

KMART The New Forms of Discount Stores

Kmart was formed in the late 1950's to challenge new forms of discount stores. They are a descendant of an organization Sebastian S. Kresge. The average Kmart store is around 100,000 square feet. In 1987 Kmart was the largest discount retailer in the United States. They currently have 2,223 stores and last year they had over $25 billion in sales which is nearly double that of Wal-Mart. In 1991 they opened their Kmart superstores. The superstore is a 150,000 square feet and is expected to gross $40 to $50 million dollars in revenues. It will also remain open 24 hours a day. One symptom is that Wal-Mart has lower prices than Kmart which makes them very hard to compete with. Kmart has to try to get out of the really urban areas so they can compete more realistically with Wal-Mart. They need to keep their appearance and service above par or this also will result in problems. Kmart's biggest problem is obviously the widespread of Wal-Mart all over the United States. They have to find a way to compete with Wal-Mart's regional distribution centers. These centers ensure the Wal-Mart customers that they are going to get the best product for the best price. Since Kmart does not have these centers they still need to pay all of the fees that deal with shipping and handling. Kmart needs to do something quick. In a recent survey 49% of people said that they would drive right past a Kmart to go to a Wal-Mart. The average Wal-Mart customer visits the store 32 times in a year, meanwhile the average Kmart customer only visits 15 times in a year. They have to be in financial trouble since they are getting pressure from vendors to pay their bills on time. Kmart needs to find a certain area that they are better at then Wal-Mart. They are not going to be able to beat their prices so they have to provide better customer service. They have select a specialized department that they can dominate and at least take away a little of the business from Wal-Mart. For example develop a top of the line auto care station for tune ups, inspections, oil changes etc. They have to research and find rare products that Wal-Mart does not carry. If it is at all possible try to lower their prices so that they provide more competition for Wal-Mart. Kmart needs to develop a way to get their products for a lower price. As already said they should come up with an idea similar to Wal-Mart's regional distribution centers. They also need to develop physical distribution management. I think if they use the idea of regional centers it will greatly increase their product flow.

God of Small Things Quotes Essay

Extended metaphor: â€Å"Perhaps Ammu, Estha and she were the worst transgressors. But it wasn’t just them. They all broke the rules. They all crossed into forbidden territory. They all crossed into forbidden territory. They all tampered with the laws that lay down who should be loved and how. And how much. The laws that make grandmothers grandmothers, uncles uncles, mothers mothers, cousins cousins, jam jam, and jelly jelly. Rahel and Estha live in a society with very rigid class lines. â€Å"Commonly held view that a married daughter had no position in her parent’s home. As for a divorced daughter – according to Baby Kochamma, she had no position anywhere at all. And for a divorced daughter from a love marriage, well, words could not describe Baby Kochamma’s outrage†¦Ã¢â‚¬  â€Å"Chacko told the twins that, though he hated to admit it, they were all Anglophiles. They were a family of Anglophiles. Pointed in the wrong direction, trapped outside their own history and unable to retrace their steps because their footprints had been swept away† The concept of â€Å"Anglophilia† is a big one in this book, from the way everyone fawns over Sophie Mol, to Chacko’s cocky attitude about his Oxford degree, to the whole family’s obsession with The Sound of Music. But it’s pretty clear that the thing they love also holds them down. When Chacko says their footprints have been swept away, he is making a reference to the way members of the Untouchable caste have to sweep away their footprints so that people of higher classes don’t â€Å"pollute† themselves by walking in them. Even though by Indian standards their family is of a relatively high social status, they are of a low social status in relation to the British. Pappachi would not allow Paravans into the house. Nobody would. They were not allowed to touch anything that Touchables touched. Caste Hindus and Caste Christians. Mammachi told Estha and Rahel that she could remember a time, in her girlhood, when Paravans were expected to crawl backwards with a broom, sweeping away their footprints so that Brahmins or Syrian Christians would not defile themselves by accidentally stepping into a Paravan’s footprint. In Mammachi’s time, Paravans, like other Untouchables, were not allowed to walk on public roads, not allowed to cover their upper bodies, not allowed to carry umbrellas. They had to put their hands over their mouths when they spoke, to divert their polluted breath away from those whom they addressed. (2.270) This quote speaks volumes about the experience of the Untouchables, and it helps us appreciate the kinds of deeply ingrained attitudes that drive so much of the prejudice and hate we see in the novel. Then [Baby Kochamma] shuddered her schoolgirl shudder. That was when she said: How could she stand the smell? Haven’t you noticed? They have a particular smell, these Paravans. (13.129) Like Mammachi, Baby Kochamma has a heap of prejudices against other social classes, and these prejudices run deep. By disparaging Velutha out loud and saying that his smell must have been intolerable, she tries to show just how high class she is. Mammachi’s rage at the old one-eyed Paravan standing in the rain, drunk, dribbling and covered in mud was re-directed into a cold contempt for her daughter and what she had done. She thought of her naked, coupling in the mud with a man who was nothing but a filthy coolie. She imagined it in vivid detail: a Paravan’s coarse black hand on her daughter’s breast. His mouth on hers. His black hips jerking between her parted legs. The sound of their breathing. His particular Paravan smell. Like animals, Mammachi thought and nearly vomited. (13.131) Again, we see just how deeply Mammachi’s prejudices run. She doesn’t see Ammu and Velutha’s relationship as love between two people, as it might look to us. As far as she is concerned, it is as low as two animals going at it in the mud. The idea of a â€Å"coolie† (lower-class laborer) having sex with her daughter is so repulsive to Mammachi that it almost makes her puke. Still, to say that it all began when Sophie Mol came to Ayemenem is only one way of looking at it. Equally, it could be argued that it actually began thousands of years ago. Long before the Marxists came. Before the British took Malabar, before the Dutch Ascendancy, before Vasco da Gama arrived, before the Zamorin’s conquest of Calicut. Before three purple-robed Syrian bishops murdered by the Portuguese were found floating in the sea, with coiled sea serpents riding on their chests and oysters knotted in their tangled beards. It could be argued that it began long before Christianity arrived in a boat and seeped into Kerala like tea from a bag. That it really began in the days when the Love Laws were made. The laws that lay down who should be loved, and how. And how much. (1.207-210) This quote is full of what might seem like obscure references, but what it’s basically doing is pushing us to think about what caused everything to fall apart for Estha and Rahel. Did everything come crashing down because Sophie Mol came to Ayemenem? Or do the events of the novel happen as a result of decisions, actions, and rules that were made thousands of years before any of our characters were even born? Do things happen for a reason, because they’re part of this huge plan, or do they just happen because the world is fickle like that? [Estha] knew that if Ammu found out about what he had done with the Orangedrink Lemondrink Man, she’d love him less as well. Very much less. He felt the shaming churning heaving turning sickness in his stomach. (4.245) We can be pretty sure that if Ammu ever found out that Estha was molested, she wouldn’t be upset with him. She’d be unbelievably angry at the Orangedrink Lemondrink Man, but she would never actually blame Estha. Yet, in Estha’s mind, what happened to him is his fault, and he carries it around as his shame Ammu touched her daughter gently. On her shoulder. And her touch meant Shhhh†¦.Rahel looked around her and saw she was in a Play. But she had only a small part. She was just the landscape. A flower perhaps. Or a tree. A face in the crowd. A Townspeople. (8.48-50) This moment turns the way Rahel understands her role at home upside-down. All of a sudden, things are totally different than they usually are. Rahel’s realization that they’re in a â€Å"play† shows us that everyone here is playing a part to some extent – they aren’t being themselves. Sophie Mol’s arrival topples over Rahel’s reality; she goes from being one of the leads to being the â€Å"nobody† in the background. Now, all these years later, Rahel has a memory of waking up one night giggling at Estha’s funny dream. She has other memories too that she has no right to have. She remembers, for instance (though she hadn’t been there), what the Orangedrink Lemondrink Man did to Estha in Abhilash Talkies. She remembers the taste of the tomato sandwiches – Estha’s sandwiches, that Estha ate – on the Madras Mail to Madras. (1.10-12) Rahel’s ability to remember things that happened to Estha and not her tells us a lot about their joint identity and how profoundly she understands him.

Role of information system in customer relationship management Coursework

Role of information system in customer relationship management - Coursework Example How to ensure strong customer service and satisfaction Customer satisfaction and service are vital components in the survival and progress of any business. it is for this reason that organizations invests heavily in ensuring that customer service reaches a level that will satisfy and woe the customer towards coming for more. Businesses need to maintain customers in a manner that will make them appreciate the brand, products or services being offered by the businesses. This paper looks at ways in which a strong customer service and satisfaction can be maintained in a business. First, know the needs of every customer in the market so as to avoid forced creation of demand where it is none existent. Secondly, it is important to perform tests with a view of building an understanding of the desires of consumers within the market segment. This helps build up innovative ideas useful in identification and solving possible problems that may arise due to customer expectation about the product o r service the business offers. Thirdly, being true to your customers can help the business a greatly. All deliveries of goods to customers should always be done at the right time. Where delivery may not be possible on the agreed schedule, proper communication with the customer is vital. Fourthly, plan well and perform periodic training of the team you work with in order to uphold business reputation and trust. It is also important to train a team that will enhance flexibility and effective communication skills. Fifthly, always appreciate your customers. It is worth sending thank you messages to your loyal customers. This strategy will likely yield positive results that help in positive growth of the business. Moreover, always create loyalty programs among your customers. This can be done through unique gift offers or special promotions targeting long time customers in the business. Always approach issues related to your customers in a mature manner as though you are dealing with a l ong time friend. This can be done by being sincere to them on issues that may arise in the day to day running of the business. It is important to promise what you can achieve other than giving unrealistic expectations. This is because empty promises tend to anger and frustrate customers making them shun any future transaction with the business. It is for this reason that a successful business need to set correct expectations since it helps in retention of customers. Develop a customer philosophy that will direct the way employees interact with clients. The philosophy developed should be able promote respect and constant appreciation of customers. This is a key component in customer satisfaction and retention. Lastly, develop a quick response time whenever there is a blame game in business transactions. Effective communication and admittance of a mistake can really yield marvelous results in the long term. This should be followed with a communication on what you plan to avert similar mistakes in future. Customer Service System Customer service refers to various business practices aimed at providing services to clients during and after a business transaction. These services are aimed at building customer satisfaction and retention. Customer service system refers to blending of procedures, people and technology with a view of serving customer needs in a way that will promote profitability and achievement of business objectives. It is important to note that implementation of an effective client service system may be quite difficult when all the stake holders does not understand its importance. In addition, all the stake holders should be willing to buy into using the system otherwise its contribution to the business may be futile. There are numerous reasons why organizations need

Compare between TURKEY and USA Essay Example | Topics and Well Written Essays - 750 words

Compare between TURKEY and USA - Essay Example The country is rich in natural resources such as gold and iron ore with a third of its land arable. Although formally recognized as the republic of Turkey in English, it is also known as Turkiye Cumhuriyeti in Turkish. The country has a total area of 780,580sq km of which 9,820sq km is covered with water. The country had a total population of 73, 722,988 persons as at January 1, 2011 out of which about 18 percent reside in Istanbul. This is mainly because a large percentage of the population resides in cities. The percentage of males is slightly higher than that of women. The population growth rate was 1.45% in 2009. The life expectancy in the country is 71.5 years with employment rate of 43% as at 2010. The major towns in Turkey include Istanbul, Ankara, Izmir, Bursa, and Adana among others. Out of these towns, Ankara is the capital city from where various administrative activities are carried out. In terms of size, it falls second after Istanbul. Ankara is elevated at 938 metres with a population of about 4.5 million as at 2010. The city is located at Anatolia and commercial and industrial activities carried in there. Moreover, the city hosts all the foreign embassies and has an effective transport infrastructure. The country is divided into 81 provinces in order to easy the administrative process. In terms of its economy, Turkey incorporates agriculture and modern industry. The private sector has been thriving very well and has been a source of employment to the citizens. In the achievement of the economic success, the government has played a significant part in providing reforms that have streamlined the entire process. Environment conservation has been a very crucial aspect in turkey. The country forest covers about a third of the land, which is a significant percentage. In an effort to avoid its exploitation as well as of other natural

Hart-Fuller Debate Essay Example | Topics and Well Written Essays - 3000 words

Hart-Fuller Debate - Essay Example Introduction to Hart’s Concept of Law: Hart in his book addresses three critical issues. The questions which arise from these legal issues are (1) how does law differ from and how is it related to orders backed by threats? (2) How does legal obligation differ from, and how is it related to, moral obligation? (3) What are rules and to what extent is law an affair of rules?1 Laws, Commands and Orders: Hart argues in the first chapter of his book that laws are varieties of imperatives which differ in nature according to the tone of the individual. The acts of human beings to ask someone for help, to request someone for an act, or to order someone to do or to abstain from doing something, which might be backed by threat, or in other case where a man might be coerced to do something are all an indigenous part of the social nomenclature in which the society thrives and survives. Hart argues that law is a social construction backed by history. Law is an institution which always did n ot exist. It emerged for special reasons, and because of those reasons it has taken the form it takes. Law as the Union or Primary and Secondary Rules: Fundamental lawmaking power rests of the customary social rule, and it is through this rule that the sovereign authorises itself to make laws. Hart argued that law is nothing but a social construction of primary and secondary rules. In order to understand the effect of such rules, it is crucial to realise that Hart identified Rules of behaviour and rules of recognition as minimum standards for the existence of a legal system. We shall analyse the understanding of these rules later in the paper, but for now, it is important to draw a distinction to draw a parallel between these two rules and associate them with the primary and secondary rules. Primary rules may be defined as such ruled which guide behaviour of an individual by imposing duties on people, secondary rules provide for identification, change and enforcement of primary rule s. Both these rules are attached to the law of recognition and behaviour and the law works within this social pattern living in the society. Rules are present when there is a certain kind of social practice, regular behaviour together with the set of attitudes known as acceptance.2 Sovereign and Subject: Hart conceptualises that wherever there is a law, there is a sovereign, characterised negatively and positively by reference to the habit of obedience; a person or body of persons whose orders the great majority of the society habitually obey. This is the fundamental relationship between the subject and the sovereign.3 The most basic characteristic of democracy is the uninterrupted continuity of law making power by rules which bridge the transition from one lawgiver to another: these regulate the succession.4 Hart argues that in a sovereign State the laws are made through the acceptance of obedience of the majority of the people. The Constitution is the document which authorises the legislature to make laws for the people, but the legislature is not beyond the law since the power vested in him was granted by the Constitution itself. Therefore, it can be argued that the Constitution is the supreme law of the land and the law making bodies come under the purview of the Constitution. However, the lawmaker is not limited by the Constitution in order to enact laws, and he has the will to be obeyed by the

Business planing Assignment Example | Topics and Well Written Essays - 1500 words - 1

Business planing - Assignment Example Our products will be of high quality and our services will be exceptional (Tuver, 2009). Zaet mobile home accessory and gift shop aim at creating a personalized home environment. Our services and products will be located in the City of San Diego as we look forward to extending it to the other parts of the state (CANN, 2012). Our stores will be in various part of the city, and we shall have a twenty-four hours customer service in place. The city of San Diego will be our target market. As per the population study that was conducted in the year 2014, the city’s population was estimated at 3,368,650 people with 58.9% being white, 45.1 % non-Hispanic, 6.7 % black and African-American. 28.8% Latino whereas the Asian population was represented by 15.9 %. The San Diego’s urban area has a total population of 3,095,313 making it the third largest city in the state of California (Simons, 2011). The high population will provide a ready market for our products. Our business will target more middle-class and upper-class consumers who focus beyond the national gift chain stores as well as home accessory for that expression of style and individual personality. I believe that our unique products, quality, and unparallel customer service, as well as values, will complement the experience of our clients. Through our online services, we expect to target more and more customers in the city as well as other parts of Calif ornia. The firm expects to register comfortable total revenue at the end of the first year, Followed by the development of marketing plans in the second year as well as creation of E-commerce and extension of our business to other parts of the city by the end of the third year (Sarr, 2009). The 2013 census report indicated that there was an increase in the number of household. San Diego has over a million families according to the survey that was conducted in the year 2013. The city has recorded a poverty level of below ten percent as well as median

Marketing plan paper Research Example | Topics and Well Written Essays - 500 words

Marketing plan - Research Paper Example In this case, QuickBooks is the accounting software whose brand is worldwide renowned and whose product positioning and differentiation strategies are prospective (Stock, 2011). Differentiation of merchandise refers to the inculcation of attributes, such as pricing and quality, into a merchandise to encourage prospective clientele to perceive it as different and usable. For instance, the company that produces QuickBooks, the popular accounting software has its objectives in place. This is to ensure that the quality value of their software packages is accurate and never fails. Moreover, they have to ensure that there is timely delivery when clients order them online with no cases of faulty packages. With regard to the truth that other accounting package manufacturers bear diverse and unique merits against QuickBooks, this serves to differentiate it from its competitors (Hartline, 2010). Positioning is how affiliations provide their merchandise or service brand identification as they enter the marketplace. This step follows determination of how to differentiate merchandise and services. For instance, in the case of the QuickBooks affiliation, it markets itself on the premise that it does not fail in delivery processes and that its merchandise is free from errors or indiscriminate faults. Besides, the accounting packages are positioned against the competitors’ similarly oriented packages from other affiliations. This is based on timely delivery and excellence in the creation. QuickBooks, therefore, ensure that they dedicate their marketing efforts to emphasize their positioning (Stock, 2011). A positioning statement is a short phrase or sentence that communicates the pertinence or essence of differentiation and positioning prospects. This statement poses as a potential marketing applet, which prospectively judges all the marketing elements. This ensures that they are in place with the affiliation strategies. For instance, the QuickBooks positioning

Economic and Society Essay Example | Topics and Well Written Essays - 2000 words

Economic and Society - Essay Example There are two different issues regarding the role of globalization as many argue that the governments, due to globalization, have lost their control over their own sovereignty. On the other hand, it is said that the due to globalization, the world as a whole, benefit from the globalization. It is often argued that with the increased globalization, governments often lose control over their own economic affairs and as such many developing countries consider globalization as a force which is in direct contravention of their sovereignty and control over their own domestic affairs. Due to globalization, domestic institutions gradually lose control over the economic policy making as global organizations largely influence their decision making process and the resulting changes would bring in more economic hardship rather than economic affluence for the country. Many developing countries also fear that the resulting changes would create such socio-cultural changes that the society will no longer remain within it traditional attire and foreign ideas and values will start to dominate the society. However, on the other hand, results also indicate that third world countries often benefit from globalization due to sheer transfer of technology, capital as well as knowledge. The resulting changes not only bring prosperity but also economic growth as well as a more secure future of the nation. It is truly difficult to define what globalization is and under what conditions it can provide desired benefits. Over the period of time, the discipline has evolved into a position where it has integrated many different disciplines and emerged as one of the most talked after multi-disciplinary concept. As such the current state of the concept inculcates into it various theoretical approaches, different disciplines as well as theoretical foundations, which are currently behind the emergence of the modern definition of globalization. Globalization has

Broken Homes Essay Example for Free

Broken Homes Essay He made it sound like that’s the reason why I became a secularist. Having a bad experience growing up, growing up without a father or being in a broken family are common misconceptions that the theists think about the secularists. Both of my parents consider themselves as cafeteria Catholics, for short, secular people. They may be annulled, but they said that they felt happier when that came. According to the elders, people wouldn’t say that they came from a broken family because of heavy religious influence which makes them think that they are heretics. At the present time, people are very open about it and it is accepted in the society. Today, the religious community are alarmed with the boom of divorce within their society. According to this, 20% of Catholics and Protestants and 40% of Jewish marriages end in divorce after 5 years. Also, the Barna Research Group stated that in the United States, 11% of the adult population is divorced, 25% of adults have had at least one divorce during their lifetime and divorce rates among Christians are significantly higher than those of other religious denominations, and much higher than atheists and agnostics. The results from their research about divorce rate by religion show that: 1. Non-denominational (Evangelical Christian congregations that are not affiliated with any specific denomination) – 34% have been divorce 2. Baptists – 29% 3. Episcopal – 28% 4. Pentecostal 28% 5. Methodist – 26% 6. Presbyterian – 23% 7. Lutheran – 21% 8. Catholic – 21% Their research proved that the conservative Christians have the highest divorce rate, while the mainline Christians have a lower divorce rate. They found some new information that states that atheists and agnostics have the lowest divorce rate at all. The Associated Press confirmed the results of the research. There was a point in time where the Baptists had the highest divorce rate of any Christian denominations. Another research about divorce rates by religion stated that: Jews – 30% have been divorced Born-again Christians – 27% Other Christians – 24% Atheists and agnostics – 21% Ron Barrier, spokesperson of the American Atheists commented about the research. He said: These findings confirm what I have been saying these last five years. Since Atheist ethics are of a higher caliber than religious morals, it stands to reason that our families would be dedicated more to each other than to some invisible monitor in the sky. With Atheism, women and men are equally responsible for a healthy marriage. There is no room in Atheist ethics for the type of ‘submissive’ nonsense preached by Baptists and other Christian and/or Jewish groups. Atheists reject, and rightly so, the primitive patriarchal attitudes so prevalent in many religions with respect to marriage. StopTheReligiousRight.org also commented: We hear an awful lot from conservatives in the Bible Belt and on the TV about how we all should be living. Certainly a culture that teaches the conservative religious values of the Christian right must have clean living written all over it. And lots of ripe fruit from their morally superior lives abounding. It doesn’t. Far from it. People that talk the loudest may be the ones walking the slowest. Joining its history of Biblically correct bigotry and discrimination, it is an area with the highest divorce, murder, STD/HIV/AIDS, teen pregnancy, single parent homes, infant mortality, and obesity rates in the nation. As a region, the Bible Belt has the poorest health care systems and the lowest rates of high school graduation. So, before theists say something about secularists growing up in broken families, they should look at the statistics and see the reality about what’s happening in the religious community. Copyright  © 2000 to 2009 by Ontario Consultants on Religious Tolerance Originally written: 2000-APR-27 Latest update: 2009-JUL-20 Author: B.A. Robinson Youngblood One broken family By Joyce Raboca Philippine Daily Inquirer First Posted 00:51:00 12/18/2008 Filed Under: Social Issues, Charter change, Graft Corruption Jose Rizal wrote a chapter in ?El Filibusterismo? ironically titled ?Maligayang Pasko? [Merry Christmas]. Basically, it narrates the fate of the Family De Dios, who had something other than a merry Christmas. The daughter, Juli, became a maid; the grandfather, Tata Selo, went mute; and the father, Tales, was kidnapped by rebels. All this while the Spanish priests went merrymaking over the ill fortune of this family. While I do love this lesson in Filipino, I can?t help but feel sadness, even bitter resentment, over how our fate has never really changed from that time. We Filipinos are still a broken family, especially this Christmas. Before I continue, let me first give a Merry Christmas greeting to every uncorrupted politician, tooth fairy, reindeer, principled Philippine president, and elf out there. As a teenager in her senior year in high school, I have definitely felt the Christmas spirit from such characters. As I was scanning the news with my dad the other day, I read about an ?uncorrupted politician? whose case was dismissed because he was not put on trial early enough. They used this fancy label for it too: ?clear transgression of the constitutional rights of the accused.? I was a little confused and asked my lawyer father to explain it to me. I had to digest his answer for a while and, being naà ¯ve, I had to ask for some clarification. ?So the court said that because the trial took too long to process, he can go free asked my father. ?Does that mean all the thousands of cases that have been sitting around with the Sandiganbayan for more than five years are being dismissed as well Apparently not. Just when I thought it was never too late for justice to be served (especially in the Philippines, where the justice system is always 10 years too late), connections once again overpowered justice. But the wrongly accused and impatient defendants have to be friends with the ombudsman first, I believe. So thanks to the uncorrupted politician, I have finally realized what  Christmas is all about. The tooth fairy has also decided to visit and spread the Christmas spirit in the form of plundered money. Hooray for those who put morality under their pillow! In recent weeks, another former top official decided that lying, stealing and making a run for it should merit him freedom and a gift. Perhaps he wants his teeth back? But teeth cannot be grown back once you?ve put them under your pillow, and toothless is the man whose honesty has been bought by hundreds of millions of pesos from the tooth fairy. I will definitely bear that in mind this season. Maybe the tooth fairy will come and leave me a few billion pesos in exchange for my honesty as well. Our painfully principled President has decided to steal Santa?s reindeer this year and ride him across the country. I believe his name is Cha-cha. Although she says that the reindeer is bringing Santa?s big bag of solutions to the country?s problems, I now have doubts that Cha-cha the reindeer ever belonged to Santa. After all, the song never mentions a reindeer named Cha-cha. Hmm ? that seems a little bit suspicious. I just hope she won?t be riding that reindeer in 2010. That would be a heavier weight on all of us (and not just on Cha-cha) come next Christmas. As for my own life, college is around the corner, and I?m waiting for Santa?s elf to come ask me what I want for Christmas. Other than a box of transparent candies to send to the government, I would like to get into the top two colleges to which I applied for admission. January 2009 is acceptance month and I am hoping at least that Christmas stays bearable ? maybe even enjoyable ? until the results of the exams come out. And when those results come out, I hope I won?t come down with a case of ?senioritis,? a sickness common to high school seniors after being accepted to a college. The symptoms include lazing around, slacking off, and developing grade apathy. That would not be a good thing, especially since our parents are Santas (shh, don?t tell them I know). As for all of you, be happy with the shallow merry-making for now, because we Filipinos are not going to find merriment in having Spanish priests running the country this Christmas. Maybe next year we won?t lose our voice amid the injustices, like Tata Selo in ?El Filibusterismo.? Like Juli and Tales, maybe next year we will be free from injustice and the craziness of our politics. Maybe next Christmas, the reindeer, the elf, and the tooth fairy will bring nationalism, honesty and justice back to our country. In the meantime, Merry Christmas!

Effect Of Design On Paper Plane

Effect Of Design On Paper Plane I have decided to write my extended essay on this topic because this activity of flying paper planes was taught to us in our childhood when we were not mature enough to learn the principles of science and investigate and apply them to these planes. But what caught my interest was that how do paper airplanes of such light weights can maintain their flight and speed even while facing winds and other external factors. Firstly, I had decided to write my essay based on the principles used in these planes, but my supervisor guided me that it was too broad and thus, I narrowed down my topic to- To investigate the difference in the flight of the paper planes and the distance covered by it due to the shape, mass and design of the paper planes. Introduction: Paper airplanes are a source of fun and entertainment for many people while they can also be used as a part of learning and gaining some amount of knowledge about the real aeroplanes. Some people have also named this activity as an art named aerogami which derives from the name origami (a Japanese art of paper folding). But, this so called entertaining and competitive activity has a lot of science especially physics related to it as we can associate with different laws of aerodynamics and motion. Paper airplanes have designs ranging from simple planes for kids to competitive and complex ones like moth, tumbler, spike and many more to mention. As kids, we never used to think about these principles and designs that are associated with every part of paper planes from its formation to its flight. But, as a science student, I have got an opportunity to explore the various aerodynamic principles and get a deeper knowledge about the physics of paper planes. History: The history of paper planes is not quite specific as there have been many people who have contributed their theories in this field. Da Vinci who was a famous Italian personality is often regarded as the inventor of paper airplanes while some have the belief that Chinese people are the real makers of this art as they were the ones who invented paper and kites. The modern paper planes saw their creation in the year 1909 while its acceptance was seen in after two decades in the year 1930 by John Northrop. Actually, Northrop tried these designs in order to test the real principles of flying aircrafts. From the early centuries till the current years, there have been many changes and corrections made in the structure of paper planes such as in their shape, style, fashion and lift. Thus, the paper airplanes have seen a lot of modifications in their shape and principles over these years and this credit goes to each and every person who has contributed to it though the history is not quite fa mous or known. Aerodynamics and Paper Airplanes: Aerodynamics is referred to as the branch of mechanics that deals with the motion of air and other gases and with the effects of such motion on bodies in the medium. Aero planes and helicopters follow the principles and theorems of this study of science and this is the case in the working of the paper plane models. The various principles that are used in this study and more specifically in the working of paper planes are drag, lift, flight, thrust, weight and velocity. But I will be concentrating more on the flight of these paper planes in regard with my topic. Lift, thrust, weight (gravity) and drag are the four important factors in the working and the distance covered by paper airplanes. Thrust- Thrust is the force on the horizontal left hand side of the paper airplane which decides the flight of the paper plane and this force comes from the strength of the pilot (in this case the person throwing or flying the paper plane). While taking flight, this altitude is converted into forward motion, which results in the proper flight of the airplane. Lift- Lift is another force on the vertical upper hand side of the paper airplane. Usually, the air below the wing of the airplane push the air on the upper side and the air above the wing push the air on the lower direction. At this point when the lower air pressure is much harder than the upper one, then the airplane is able to fly. And also the wings of the airplane are curved which allows the air to move over the top more quickly, thus resulting in lift or upward push. Drag- Drag is the force that is present in the horizontal right hand side of the paper airplane which allows or decides the maximum distance of any paper airplane. A plane is said to have a lot of drag when the plane pushes a lot of air, in which the paper airplane does not fly more distance. But when the drag is as low as possible the plane is able to cover more distance due to the low amount of air pressure in the horizontal direction. Drag can be compared to the friction present on the surface when any object is moving. Weight (gravity) Weight or gravity is the force that covers the vertical lower hand side of the paper airplane. The airplanes weight must also be less so that it can fight the attraction of gravitation and thus, the plane will be able to fly more distance in the air. The greater the weight, the more the attraction and the lesser the distance covered. Thus, these are the four crucial principles that have to be observed for any paper airplane to fly in the air. But, are only these principles responsible for the flight of the airplane? Are there any other factors that are also important in deciding the flight of a paper airplane? Do the physical quantities or the structure of the airplane play a major role in planning the flight or the distance covered? In order to research and find out whether there are any other principles related to the flying of airplanes that are made out of paper, I have performed an experiment that brings out the result whether the shape, weight and the structure play an important role in determining the flight of the paper airplane. Experiment: Aim: To determine the relation between the designs, type of paper used in the paper plane and the flight or the distance covered by the paper plane. Hypothesis: I had the initial idea that the paper planes that are lighter in weight cover more distance as they have the capacity to move in the air with the force or the pressure of the wind. And I also felt that the paper airplane of design Moth will cover the largest distance as I have experimented and used this design many times for its smooth kind of flying. I usually thought that the type of paper and design are both equally important for the flight of paper planes. Variables: Dependent variable- The distance that the paper planes covers is the dependent variable. Independent variable- The type of paper used and the designs of the paper planes are the independent variables. Controlled variable- The force with which the person throws the paper planes can be controlled and also the height and the direction in which the paper planes are thrown are controlled. Uncontrolled variable- the force of gravity and the drag in the air acting on the paper planes are uncontrolled. Also, external factors such as wind, dust particles cannot be controlled. Apparatus: 7 X Meter scale/ Ruler of 100 cm 1 X Chalk 5 X Paper planes of different designs made up of cardboard paper 5 X Paper planes of different designs made up of A-4 size normal paper 5 X Paper planes of different designs made up of hand-made paper 1 X Analytical balance Note: The paper planes used in the experiment must be of 5 different designs but these designs must be used throughout for every kind of paper used. Procedure: 1. Make the following paper airplanes with the following types of paper- Design of paper airplane Type of paper Type of paper Type of paper Pictures Arrow Cardboard Hand-made A-4 size normal paper Moth Cardboard Hand-made A-4 size normal paper Flying fish Cardboard Hand-made A-4 size normal paper Wide Cardboard Hand-made A-4 size normal paper Unknown Cardboard Hand-made A-4 size normal paper Note that the flaps or the wings of the paper planes must be folded in the upward direction. 2. Gather all the apparatus needed to perform the experiment and select a wide, open and a large area without any obstacles such as pillars or other objects in the area where the experiment is performed. 3. Firstly, mark the initial position with the help of a chalk. This position is the point or the line from where the paper plane needs to be thrown. Note that the person throwing the plane with the help of his hands must not exceed or go behind the line while throwing the plane. The initial position needs to be constant for all the paper planes. 4. Take all the paper planes of design Arrow of materials- cardboard, hand-made paper and A-4 size normal paper. Take each one of them and fly them from the height of the shoulder of the person who is throwing the paper plane. Measure the distance covered by the plane with the help of the chalk. Mark the point where the plane falls on the ground and then measure the distance from the initial position. 5. Similarly, repeat the experiment with the paper planes of other designs. Measure and record the distances of all the planes and tabulate the readings. 6. Also, measure the weight of all the paper planes on the analytical balance and record them. Risk Management: While making the paper planes, see to it that the shape is symmetrical and the folds that are made on the wings must be equal on both sides. Also, note that the person flies the paper plane with enough force. This is because the capacity of the paper plane to fight against the drag in the air increases if the initial velocity of the plane is high. Important note: Note that the readings of the distance covered by the paper planes must be taken at least 5 times to reduce the errors during the experiment. Also, whenever the paper planes are thrown, the tip of the paper plane must be made straight so that the plane flies smoothly on the basis of its shape and the type of paper used because the fold or the improper tip of the plane may be an obstruction for the plane to cover its normal distance. Raw and Processed Data: Sr. No. Type of paper Design of paper planes Distance covered by the planes (centimeter) Average distance covered by the paper planes (centimeters) Weight of the paper plane (grams) 1.a. Cardboard paper Arrow 379.30 +0.1 340.70 +0.1 367.10 +0.1 323.00 +0.1 298.20 +0.1 341.66 +0.1 11.319 1.b. A-4 size normal paper Arrow 483.90 +0.1 670.50 +0.1 435.90 +0.1 458.30 +0.1 698.30 +0.1 594.38 +0.1 3.648 1.c. Hand-made paper Arrow 406.20 +0.1 425.10 +0.1 373.60 +0.1 395.80 +0.1 397.00 +0.1 399.54 +0.1 10.062 2.a. Cardboard paper Flying fish 299.10 +0.1 353.20 +0.1 381.40 +0.1 297.50 +0.1 292.20 +0.1 324.68 +0.1 13.511 2.b. A-4 size normal paper Flying fish 311.70 +0.1 373.00 +0.1 282.50 +0.1 344.90 +0.1 381.70 +0.1 338.76 +0.1 4.397 2.c. Hand-made paper Flying fish 287.30 +0.1 293.70 +0.1 366.00 +0.1 330.60 +0.1 360.30 +0.1 327.58 +0.1 12.483 3.a. Cardboard paper Moth 358.20 +0.1 399.10 +0.1 322.30 +0.1 371.70 +0.1 448.20 +0.1 379.90 +0.1 10.786 3.b. A-4 size normal paper Moth 492.90 +0.1 421.00 +0.1 455.80 +0.1 583.10 +0.1 502.60 +0.1 491.08 +0.1 4.395 3.c. Hand-made paper Moth 389.30 +0.1 324.20 +0.1 462.40 +0.1 387.00 +0.1 353.20 +0.1 383.22 +0.1 9.244 4.a. Cardboard paper Delta-Wing 276.00 +0.1 201.90 +0.1 250.10 +0.1 196.30 +0.1 227.00 +0.1 230.26 +0.1 14.371 4.b. A-4 size normal paper Delta-Wing 252.60 +0.1 259.40 +0.1 299.90 +0.1 274.70 +0.1 251.30 +0.1 267.58 +0.1 4.400 4.c. Hand-made paper Delta-Wing 296.20 +0.1 257.80 +0.1 231.60 +0.1 237.60 +0.1 241.50 +0.1 252.94 +0.1 11.196 5.a. Cardboard paper Paper Jet 226.40 +0.1 214.40 +0.1 183.20 +0.1 165.10 +0.1 180.70 +0.1 193.96 +0.1 12.948 5.b. A-4 size normal paper Paper Jet 335.10 +0.1 307.80 +0.1 362.30 +0.1 330.00 +0.1 405.40 +0.1 348.12 +0.1 3.907 5.c. Hand-made paper Paper Jet 336.40 +0.1 291.60 +0.1 337.90 +0.1 367.80 +0.1 337.20 +0.1 334.18 +0.1 7.927 The uncertainties in the experiment is + 0.1 cm because least count on the meter scale is + 0.1 cm. Observations: From the observation table, we can almost indicate that the heaviest paper plane in every type of design covers the shortest distance while the lightest paper plane covers the highest distance. We see that the paper planes made out of cardboard paper are the heaviest in every design of paper used and the ones made out of A-4 size normal paper are the lightest. But in the table, there is an observation for the paper planes of design Paper Jet where the distance covered has drastically reduced for the cardboard paper when we compare planes with other types of papers used and also when we see the difference between other types of paper planes. Conclusion of the experiment: From the above observation, we can state that the design and weight of the paper plane and the type of paper used are important to determine the distance covered by the paper airplanes as we obtain different readings of distances covered by the paper airplanes of different designs. But, here the question arises as to why the weight affects the flight of the paper planes and another question is that what are the other relevant factors that affect the flight of the paper planes. Wings functioning theory: Wings are important features of any object or creature when it comes to flight and balance in air. Birds have wings with the help of which they are able to fly and for fast transportation and development of technology, these principles of the wings were used in the making of aero-planes. And these wings also play a crucial role in enabling the paper airplanes to fly through air. According to Bernoullis principle in relation to aerodynamics, whenever the speed of air is greater, the pressure that the air exerts on the surface is lower and vice versa. Thus, we can relate this principle to paper airplanes and state that when the paper airplane is in air, the air passes through both- the upper as well as the lower part of the wings. Also, the wings have an angle of attack as the wings are not straight while passing through the opposite air drag and they create an angle with the air. According to my experiment, when the wings pass through the air, the angle of attack is created with the air and thus, the wings move upwards. This activity makes the speed of air greater in the upward part of the wing and reduces the speed in the lower part. On applying the Bernoullis principle, the pressure on the upper part reduces, thus creating suction with the wing and pulling them upwards. While the pressure under the wings increases and this pushes the wings in the upward direction. This helps the paper airplane to remain aloft and stable in the air. There is another principle that helps the paper planes remain in air for a longer time which is Newtons third law of motion which states that every reaction has an equal and opposite reaction. During the flight of the plane, the wings face a considerable amount of air coming towards it and when this air applies force or creates pressure on the wings, the wings, in return, apply force and pressure on the air which helps them to remain stable in the air. Thus, Bernoullis principle and Newtons third law of motion are both appropriate reasons for the flight of paper airplanes in the air with the help of the wings. Also, this theory varies accordingly with the different types of designs used in the experiment because not all planes have the same structure of wings and thus, the amount of pressure and the amount of force applied on the wings is different. For example, the arrow, moth and delta wing have the same type of wings that are mentioned in the theory (that is they are tilted upwards). But designs such as paper jet and flying fish have quite different shapes of wings that are evident from the diagram of the airplanes shown in the experiment. Thus, for the paper jet, there are several folds and flaps in the wing itself and thus, the amount of pressure and the reaction force from the wings towards the air, are different at different parts of the wings. One part of the wing has several folds on one another while one part has a smooth surface. So, the wings air pressure at the smooth surface of the wing may be different than the pressure and force on the folded surface. Thus, there are possibilities of various kinds of movements such as ups and downs or loops or nosedives of the plane and thus, there is a difference in the distance covered by these planes. So, we can draw conclusions that the design of the wings or the planes is on e factor that is responsible for the distance covered by the paper planes. Weight theory: The observation table from the experiment proves that for these designs, the greater the weight of the planes is, the lesser distance is covered by them. Drag is the horizontal force that acts on the paper plane when it flies through the air. Thus, this force becomes an obstacle for the plane to cover more distance. In order to fight and resist this air pressure, we need to have a strong material of paper which has the capacity to resist the air drag. From the materials of paper used, cardboard paper is the heaviest and we can thus, say that it has the largest amount of power to resist air drag. But, at the same time, there is a force of gravity acting downwards towards the ground surface. And according to theory of gravity, the more the weight of the object is, the greater is the attraction. Hence, we can say that though the cardboard paper is the heaviest, it also has a greater force of attraction due to gravity. This mixture of gravitational force and the air drag makes the cardbo ard plane cover the least distance. Thus, the weight of the paper used is one reason which affects the distance covered by the paper planes. The above theories indicate that the wing functioning theory forms the basis for which the paper airplanes fly and the weight theory determines the distance covered by the paper airplanes in relation to its weight. Though the normal paper has the least weight, the wind and the force from the person throwing the plane enable the plane to move smoothly in the air. Thus, as there is least attraction of gravity for this plane, it is able to fly farther distances. Thus, the weight theory in regard with drag and gravity helps to determine the distance covered by the planes. Evaluation of the experiment: Improvement of errors: While throwing the paper airplane, the force applied on every paper airplane might not be the same which leads to the variations in the readings obtained. In order to improve this error, the person must decide a particular fixed amount of force or energy that he will apply to the plane. This action can help to reduce some amount of errors. The experiment is performed in an open area where there are now windows or sources of high air flow. Though high amount of air flow is avoided, there is a possibility of some kind of passage of wind which might affect the flight of the paper airplanes. For example, the amount of wind present may not be equal all time and thus, this may affect the flight of planes accordingly. Thus, the thrower must use enough force that can help the paper airplanes to overcome gravity and fight the air resistance. The distance covered by each paper plane was measured five times in order to reduce systematic errors. This step may also affect the flight of paper planes sometimes as the landing of the paper planes is very which may include crashes with the ground surface. Due to crashing, the sharp tip or the nose of the paper plane may get disturbed or blunt. And this change in the shape of the tip may lead to the variations in distances covered. To overcome this error, the thrower must be careful and always try to straighten up the tip of the paper airplanes. By doing so, the crashing of the planes can be avoided and the normal flight of the paper planes can be maintained. The folds and flaps of the paper airplanes have to be done with perfection so that there is no problem with the flight of the planes and the planes can cover their actual distances. For paper airplane readings of paper Jet, we notice that the distance covered by the normal and hand-made paper is quite different and higher than that covered by the cardboard paper plane. The reason for this is the design and the stiffness of the cardboard paper. The design of this paper plane is very complex and it includes several minor and major folds and flaps. Due to the tough material of cardboard paper, it is very difficult to follow all the steps of the design. Thus, the design of this plane is not perfect enough and the folds also do not remain stable. This is the reason why the paper plane covers very less distance as compared to other planes of the same design. In order to avoid these construction errors, the person may change the type of design used that fits according to the material of paper used or the folds must be done carefully and a much better plane of the same design can be constructed. The apparatus used in the experiment such as the analytical balance and the meter scale must work properly to avoid systematic errors and the weight and distances of the paper planes must be measured carefully. The calculations such as the average distance must be correct to avoid any random errors.

The Impact of Education on Economic Cost of Diabetes

The Impact of Education on Economic Cost of Diabetes Diabetes mellitus is undeniably a global epidemic. Development of drugs and other health care tools for the treatment of diabetes patients are in full swing all over the world, yet, little attention is given to the education of the diabetes patient. The availability of literature related to diabetes education in Saudi Arabia is very limited. Most literature and studies have focused on the prevalence of diabetes throughout the region. Diabetes education is of significant concern because of the detrimental effects of diabetes to the lives of the diabetic patients, especially in the economic and social aspects. Diabetes self-management education (DSME), if properly implemented and evaluated, can help improve glycemic control, self-care and emotional well-being and reduce the cost of care (Izquierdo, 2003). According to the International Diabetes Federation (IDF) (2009), some of the long-term goals of diabetes education are to decrease the burden for those at risk for or living with diab etes and their families; and to reduce the economic burden of diabetes at individual and societal levels. The government and health care sector plays a very important role in the proper guidance of the Saudi people. This paper explores the effects of health care education on the cost of diabetes mellitus treatment in Saudi Arabia. Research Statement Diabetes mellitus has already become the most common non-communicable disease in the world (Alwakeel et al., 2008). According to recent epidemiological data, the incidence of diabetes mellitus in many Arab countries is particularly high; the information about the prevalence of diabetes in Saudi Arabia is rather limited, but it is clear that diabetes remains one of the most serious health issues in Saudi Arabia (Alwakeel et al., 2008). The current state of research shows that a multi-disciplinary approach to diabetes is a viable solution to the existing diabetes issues in Saudi Arabia (Udezue et al., 2005). Unfortunately, little or no information is provided about what diabetes is; how it works, and whether it can be cured and prevented. Al-Saeedi, Al-Dawood and Elzubier (2002) wrote that hundreds of diabetic incidents in Saudi Arabia are uncontrolled because they hold numerous misconceptions about diabetes and its treatment. These misconceptions have a detrimental impact on their treatment outcomes (Al-Dawood et al., 2002). This research is important because education could be a significant factor on diabetes prevention and management issues, and may play a role in finding a solution to the problem. Education may provide individuals with better awareness of preventive measures to avoid or control diabetes, and therefore also contribute to reducing the economic costs of diabetes mellitus treatment in Saudi Arabia. In addition, diabetes patients who have low income will be able to benefit from the more comprehensive education programs, and in effect improve their financial status (Izquie rdo, 2003). Given the seriousness and extent of the diabetes situation in Saudi Arabia and the existing gap in literature, there is an urgent need to explore the positive economic effects of diabetes education in Saudi Arabia. This research will also aim to prove the efficiency of diabetes education as a form of preventive health mechanism. The researcher expects that the results will lay the foundation for the development of sound medical educational policies in Saudi Arabia. Justification In 2010, Saudi Arabia ranks third in the global prevalence of Type 2 diabetes and second highest in terms of percentage of national healthcare expenditure on diabetes (Kalyani, 2010). According to Al-Dawood et al. (2002), the rate of treatment-related misconceptions in Western Saudi Arabia is high, which implies that there is a need for one-on-one level education to encourage better knowledge. In other countries, proper diabetes education has reduced the incidences of lower-extremity amputation, decreased medication costs and hospitalisation. Izquierdo et al (2003) compared diabetes education through telemedicine and that with in-person education. The study showed that both tools were accepted by the diabetes patients but the technology provided by telemedicine suggests that more diabetes patients can be educated when using this tool (Izquierdo, 2003). These literatures provide an overview of the current situation for Saudi Arabia with regards to diabetes treatment. There may be some parts of Saudi Arabia where the diabetes patients do not have the transportation to go to the Primary Health Care Centers (PHCCs). This proves that diabetes education must be a priority in health care in Saudi Arabia to decrease the prevalence of diabetes in the country and to decrease the treatment costs for diabetes. Research Objectives This research aims to: Determine the cost of diabetes treatment in Primary Health Care Centres (PHCC) Determine the impact of the cost of diabetes treatment to the patients Determine the effects of the economic impact on the immediate family of the patients Determine the methods being used in diabetes education in PHCC Determine the efficiency of diabetes education in PHCC as a form of preventive health mechanism Search for other possible tools that can be used to provide a better comprehensive diabetes education Methodology The research methodology done by Azab (2001) and Udezue (2005) in diabetic patients will be adapted and modified. Three Primary Health Care Centres (PHCCs) in one of the cities (Riyadh) of Saudi Arabia will be studied and the population of the diabetic patients in each PHCC will be recorded. The selected PHCC will be representative of the current situation of the diabetes treatment in that locality, but not necessarily the national situation. Therefore, increasing the number of PHCC under study in future researches will provide a more accurate situation of diabetes education in Saudi Arabia. This study will involve diabetic patients undergoing treatment in their respective PHCC as well as their families. The diabetic patient will be required to visit the PHCC for two consecutive months on a monthly regular appointment system and provided with diabetes education. During these visits, the fasting blood sugar (FBS) of the diabetic patients will be monitored and recorded. The diabetic patient and his family will be inquired with series of questions about their economic situation, family medical history, cost of medication and treatment, the type of diabetes education provided to them, the efficiency of the diabetes education and the changes they have made or observed during the course of the study. The diabetic patients will be classified according to gender and age group. The data of the patients will be obtained from the selected PHCC. Obtaining a stratified population, it is expected that the age group to where diabetes education has to be centered will be estimated. The interviews and questionnaires will also provide information on the economic effect of diabetes to the patient and to the family the patient belongs to. The economic effects will focus on the losses they have acquired due to the onset of diabetes, and the delineation of the diabetes patientà ¢Ã¢â€š ¬Ã¢â€ž ¢s income from the basic everyday needs to the needed treatment and other medications. Sampling Frame The Primary Health Care Centre will be selected through systematic random sampling. A list of all the PHCC in Riyadh will be made and random selection of the three PHCCs will be done. This number will be used to select the representative PHCC. All the diabetic patients in the three selected PHCC will be considered as the representative samples for the diabetic population for Riyadh. Based on the study by Al-Nuaim (1997), prevalence of diabetes in the rural areas is lower than that of the urban areas. This suggests that the population being considered is a representative of the diabetic patients situated in the urban areas of Saudi Arabia. Method The study will obtain data by interviewing diabetic patients and their families and giving them a set of prepared questionnaires designed to provide the over-all economic situation of the household with a diabetic patient. Medical information and medical history of the diabetic patient will be obtained through the PHCC where they are registered. The fasting blood glucose level of the patient will be taken and recorded during the set appointment to evaluate the efficiency of the diabetes education which will be given to them. On the first month, the diabetic patients, and their families will be provided with diabetes education through one-on-one level of education, counseling and by using other types of media such as magazines, books and audio-visual presentations. The questionnaires will be handed out to them and data consolidated for evaluation. On the second month, which is the follow-up appointment, the fasting blood glucose level of the diabetic patient will again be taken and another set of questionnaires will be given. Interviews with diabetic patients and their families are necessary because this information provides a more realistic picture in the lives of the diabetic patient and their families. Although it may be difficult to obtain data in this manner since the patients will divulge aspects of their personal lives, the questionnaires will be able to suggest their lifestyle and their insights about the occurrence of diabetes in their home. The data for the cost of the treatment for diabetes will be obtained from the selected PHCC and the decrease or increase in the cost of treatment will be obtained through the questionnaires handed out to them. Ethical Issues The goals of diabetes education are to optimize blood glucose control, prevent chronic and potentially life-threatening complications, and optimize quality of life, while keeping costs within acceptable limits (Ozcan, 2007). Most of the cost studies were done in the healthcare sector and very few on the individual or their families. Ozcan (2007) found out that short term diabetes education has shown efficiency, and diminishes with long term diabetes education. This shows that diabetes education has to extend from the health care sector to the diabetic patient and to the families of the patients to guarantee a continuous treatment. Ozcan (2007) also pointed out the influence of the environment to the diabetic patient. This is indicative that the support of the people around the patient is significant to the welfare of a diabetic patient. In 2005, the system cost of haemodialysis in Saudi Arabia is SAR 1700 and most diabetic patients need this at least thrice per week (Udezue et al., 2005). Thus, the cost required by a single diabetic patient for haemodialysis alone, is about SAR 265,200 per year. This does not include any costs needed for treatment of other complications of diabetes such as blindness, amputations and hypertension. According to Udezue et al. (2005), the greater acceptability and effectiveness of one-on-one teaching versus group teaching may be cultural. The treatment misconceptions cited by Al-Dawood (2002) must also be corrected, if not eradicated. Therefore, diabetes educators should be highly skilled in the organisation of effective educational programmes. They should follow the literature and apply the latest information in their daily practice (Ozcan, 2007). The IDF has set guidelines for the health care sector to follow in order to provide a comprehensive and effective diabetes education for the patients (IDF, 2009). Areas which have limited access to or resources for diabetes education may opt to use telemedicine in order to help the diabetic patients, as suggested in the study by Izquierdo (2003). The Ramadan is a Muslim tradition which requires fasting. Although studies have shown that fasting reduces blood glucose levels, the complications due to diabetes may occur such as retinal vein occlusion (Elhadd et al., 2007). This has to be considered for diabetes education. Proper information dissemination and full understanding of the diabetic patient and their families is needed to make the treatment successful, and consequently reduce the cost needed for medication. Data Analysis Data analysis will have to determine the relationship between diabetes education, change in the blood glucose level of the diabetic patient and the estimated changes in the cost of the treatment. A two-month comparison of the blood glucose level and the cost needed for purchasing medicine will suggest the efficiency of the diabetes education. The level of glycemic control will be calculated using the criteria of The Scientific Committee of Quality Assurance in Primary Health Care as done by Azab (2001). The data of the stratified population will provide a statistics of the age group that requires the most education. In addition, the efficiency of the educators will also be estimated. This will provide a baseline for the quality of diabetes education being given to the diabetic patients. The evaluation of the educators will also determine the need for proper training of the educators, as well as an upgrading or improvement of the tools that the PHCCs have. This study will require the studentà ¢Ã¢â€š ¬Ã¢â€ž ¢s t-test to determine if certain outlier data will have to be considered. Timeline for the Research This research study requires preparation of the venue and participants for the study, which includes formal letters to the possible PHCCs and permission from the diabetic patients. Proper orientation of the diabetes educators will also be considered. The materials for the determination of blood glucose level also have to be prepared and the resources have to be properly allocated. Time for the actual conduct of the method, data gathering and evaluation, and report generation will also be considered. Table 1 shows the timeline for this research. The Type of Community Participation This study will focus on the diabetic patient, the immediate family of the diabetic patient and the people involved in the selected Primary Health Care Centre. Thus, this study does not necessarily require community participation. The family members of the diabetic patient will be the only people involved in the study. Secondary data may also be taken to verify and supplement information. However, this does not require the participation of the community that they belong to. All the participants will be considered to represent the urban community of Saudi Arabia. This study will require the participation of the different health professionals in the selected PHCCs. The multi-disciplinary approach done by Udezue (2005) will be adapted for the role assignments of the people who will participate in diabetes education. The study conducted aimed to optimize diabetic control by teaching about diet, exercise, medications and other practical diabetic management issues (Udezue et al., 2005). The team for diabetes education will be led by a consultant physician; and its members will be a group of health professionals with knowledge and interest in proper diabetes self-management. The diabetes educators of the selected Primary Health Care Centre will play a very important role to the success of this research. The knowledge or information they will provide will determine the changes in the lifestyles of the diabetic patients. Re-training and re-evaluation of the diabetes educators may be necessary to provide a more standardized diabetes education at the t ime of the study. This will minimize variations in the information being disseminated to the diabetes patients and their families. Diabetes nurse educators will provide general teaching, insulin injection technique and hypoglycemia recognition and treatment, and exercise. Social workers will assess family life, schooling and cultural and socio-economic barriers; dieticians will provide education on practical diet, food availability and preferences and exercise; nurses will provide patient registration and screening and the consultant physician will give general directions and guidance as overall coordinator. Focus of the diabetes education will be on exercise, diet and medication, as these three factors are the most affected by an individualà ¢Ã¢â€š ¬Ã¢â€ž ¢s lifestyle. All participants, namely: the diabetic patient, family members and the diabetes educators will have to be properly oriented of their roles on this research before the conduct of the study. Importance of the Research In the study by Al-Ajlan (2007), he defined diabetes mellitus as a group of metabolic disorders with multiple etiologies characterized by chronic hyperglycemia with disturbance of carbohydrate and fat, resulting from insulin defect in secretion or action. Education has always been a fundamental need in our everyday lives. This does not count out the need for diabetes education. Diabetes education should determine the target population, assess educational needs according to ethnic background of the community and education level of the target group and identify the resources to tailor the appropriate program (Al-Ajlan, 2007). The economic burden of diabetes does not only affect the individual patients and their families but the state and health services as a whole. Saudi Arabia is estimated to spend between 620 and 1,142 million ID; and according to WHO records, almost one Saudi diabetes mellitus person is costing the government about $800 per month. The annual cost of treating diabetes in Saudi Arabia is about $9.6 billion (Al-Ajlan, 2007). The International Diabetes Federation (IDF) emphasizes that diabetes-specific education is required for diabetic patients and the healthcare personnel. The proper training of the healthcare personnel is essential to improve the outcome of the treatment for the diabetic patient. At present, diabetes self-management education has become an integral and critical part of the lives of the diabetic patient (Ozcan, 2007). Some studies presented major barriers to diabetes management such as low resources and the receptivity of the patients due to cultural differences (Elhadd et al., 2007). These matters can be addressed properly if the government provides enough resources, specifically on the training of diabetes educators. Other countries have already tried to use technology as a means to improve diabetes education for the treatment of diabetes patients. An example of this is the use of telemedicine. Some studies have shown that using telemedicine to provide diabetes education through counseling resulted in brief and effective interventions that supported lifestyle behavioral changes (Hayes et al., 2001). In the study done by Klonoff (2009), the use of telemedicine as a tool for diabetes education helped the health care providers communicate better with their patients and lower the cost needed for health care of the diabetic patient. Through this technology, the diabetes patient does not have to burden the cost of transportation just to get to the PHCC. The diabetes educator, on the other hand, will be able to accommodate more patients since the use of telephone will provide access to areas which may be underserved (Izquierdo, 2003). Hence, telemedicine may provide a brief yet comprehensive diabetes ed ucation to the diabetic patients of Saudi Arabia. The prevalence of diabetes in Saudi Arabia, and consequently, the cost of diabetes treatment, can be reduced by proper education of the people about diabetes. This does not only involve the diabetic patient, but also the people who influence the lifestyle of a diabetic patient (Ozcan, 2007). People with diabetes tend to be less productive in their lives due to the cost of their medications and complications of the disease. Therefore, proper guidance, through diabetes education is the best tool to improve their productivity. This undertaking requires both the health care sector and the intervention of the government to be able to guarantee its success. The governmentà ¢Ã¢â€š ¬Ã¢â€ž ¢s initiative to improve the services provided by the health care sector will provide benefit to more diabetic patients in Saudi Arabia. A decrease in the prevalence of diabetes in Saudi Arabia, and those that require diabetes treatment will improve both the individual and national economic status.

Abstinence Only Sex Education Essay -- Sex Education

Where in the first world would one expect the teen pregnancy rate to be the highest? Surprisingly, it is the United States that has the highest teen pregnancy rate of any first world country, more than double the rate of twenty other first world countries and almost ten times greater than that of Switzerland. While some of the disparity can be attributed to factors such as income inequality, the presence of abstinence only education has a major impact on birth and STD rates in the United States in comparison to other countries with more comprehensive programs. It is clear that this difference in approaches has a significant effect, and the United States needs to act to ensure the health of its citizens. Urgent actions are necessary because abstinence only education is becoming more popular in the United States and more and more school districts are adopting it. Despite its popularity it has not been proven in any way to be effective in meeting its goals of reducing teen pregnancies and STDs. In fact, there is strong evidence and reasons for its ineffectiveness that should, when compared to the dearth of evidence showing any benefit, make it clear that this is not an effective approach. Not only is it ineffective however, it also results in harm to American teenagers and society by attempting to discourage sex by saying condoms are not safe, and this results in decreased contraception use and thus more STDs and pregnancies. And finally, when America and other first world countries with abstinence only curricula are compared to countries which have a more comprehensive methodology to teaching health, it is clear what is the more effective approach. Abstinence only curricula targeted at adolescents are both ineffective at meeting th... ...ent Education: Ine." bepress Legal Series . N.p., 2004. Web. 25 Apr 2012. Santelli, John, Mary Ott, et al. "Abstinence and abstinence-only education: A review of U.S. policies and programs." Journal of Adolescent Health. 38 (2008): 72-81. Web. 27 Apr. 2012. . Slater, Jon. "Britain: sex education under fire." UNESCO courier. Jul 2000: 18. Web. 25 May. 2012. "The Abstinence-Only Delusion." New York Times 26 Apr 2007, n. pag. Web. 30 Apr. 2012. . Valk, Guus. "The Dutch Model." UNESCO courier. Jul 2000: 19. Web. 25 May. 2012.

An Unsuitable Job For A Woman: Two Detectives :: essays research papers

While reading, An Unsuitable Job for a Woman, by P.D. James and Indemnity Only, by Sara Paretsky, one is given the opportunity to slip in to the life of a female private detective and experience the aspects of what occurs during the process of a murder investigation as seem through the eyes of two very independent women. P.D. James’s character of Cordelia Gray and Sara Paretsky’s character of V.I. Warshawski are two private investigators that display great passion for their jobs and will stop at nothing in order to close their cases. But, are inexperienced Cordelia Gary and wisecracking Warshawski prime examples of private investigators or are they two naà ¯ve women who have entered an occupation where compassion and sympathy are two traits that are better left unused. Both Cordelia and Warshawski display great ability as women to enter a world of hate, lies and murder and take on roles that traditionally only men dared to enter. But, as they sift though evidence left behind by unknown assailants and pry into the lives of dead and living strangers, are these women really living lives of their own or are they becoming to emotionally entangled in a web of self destruction. Putting their lives in harms way in search of justice, an oath that they as private detectives have never took. Both women are clearly excellent detectives; they solved their cases and reaped the self-gratification that comes from hard work and determination. In spite of that, are these two women really doing themselves any justice by restraining from the certain pleasures in life they yearn to experience and enjoy but have sustained from due to the career choice they have chosen, as seem in Cordelia’s reflection of what her life may have been like if she had chosen to attend an university and Warshawski’s reflection in the park of the mother and her children. Both women are still at an age where these reflections can still become reality, yet they have chosen to continue pursuing a career that hampers their ability to achieve these personal goals. Maybe their becoming to emotionally involved in their cases is a result of their search for a way to compensate for the void their career choice has left in their lives. Both Cordelia and Warshawski became a little too preoccupied with their cases. Cordelia became so involved she was sleeping in the same house in which the murder occurred, not to mention the same bed as the deceased and she even began wearing the clothes of the young man whom she was investigating the murder of.

Is Conflict Inevitable in the Employment Relationship? Essay

The relationship between employers and employees has long been the subject of widespread study and debate within the business world. This employment relationship can be defined as a complex system in which social, economic and political factors combine with an employee who exchanges mental and manual labour for rewards allocated by the employer (Encarta Encyclopaedia Deluxe. 2004). Industrial relations and human resource management advocates have traditionally held different views on the subject of organisational conflict. Many authors have argued that organisational conflict is inevitable in most work settings and that the employment relationship is essentially a trade-off ground (Alexander and Lewer, 1998; Deery, Plowman, Walsh and Brown 2001; Edwards, 1986). Supporting this argument, this essay will argue that conflict is both inevitable in the employment relationship and also potentially productive. When employers and employees come together in the workplace, sooner or later there is invariably some conflict that will arise. Once conflict has arisen, there is many different ways in which employees will show their discontent for their working conditions. Some forms will be shown in overt and obvious ways, the most blatant and publicised of these being strikes (Alexander and Lewer, 1998). Strikes involve a removal of labour by employees from the whole or, sometimes, a part of an organisation. The purpose of the strike is to enforce demands relating to employment conditions on the employer or of protesting unfair labour practices (Hyman, 1984). During the twelve months ended May 2003, there were 241,900 working days lost due to industrial disputes (Australian Bureau of Statistics, 2003). Other forms of overt conflict include stop-work meetings, work bans and boycotts. The traditional view of industrial relations was that a lack of strikes meant that all was well and conflict was being kept to a minimum. But in recent years widespread study has found that there are many other forms of conflict that are carried out in a much more covert manner (Alexander and Lewer, 1998; Deery et al. 2001). These can include absenteeism, high employee turnover, accidents, slow downs, sabotage, theft, low morale, slackness and  inefficiency. This type of response to conflict tends to be undertaken by disgruntled individuals rather than groups due to its covert nature (Edwards, 1986). Alexander and Lewer (1998) found that the losses caused by covert expressions of conflict far outweigh the overt. They reported that in 1997, absenteeism alone cost Australian business over $15 billion, or 6.75% of each company’s payroll. Both these forms of dealing with conflict relate back to the underlying principle that employers and employees have different objectives, thus ensuring conflict is inevitable. There are five key actors in the employment relationship: Employees, Employers, Trade Unions, Employee Associations and The role of the State. Each of these actors interact to and exchange conflict and resolutions. Trade unions are responsible for enterprise-level bargaining on behalf of the employees, though recently there has been more reliance on the arbitration system. By giving workers a united voice, a union can often negotiate higher wages, shorter hours, and better fringe benefits (such as insurance and pension plans) than individual workers can negotiate on their own (Davis & Lansbury, 1993). The last 30 years have seen a steep decline in the union density and power than unions hold. In 1976, 51% of all employees were in trade unions, by august 2002 this had fallen to 23.1% (Australian Bureau of Statistics, 2003). Multi-unionism at the workplace has tended to fragment authority and obstruct union-management relationships, in cases causing workplace uncertainty and conflict from employees over who is representing them (Deery et al. 2001). Employer associations represent employers and help defend against the often well organised assault from trade unions. The role of the state is to oversee the employment relationship and ensure that employers, and employees and their representatives are able to cooperate in a manner that provides high inventory turnover, in an unbiased, safe workplace (Bamber & Davis, 2000). Employers, unions and governments have mainly divergent concerns about the future directions and impacts of workplace conflict and the effect it has on their objectives. Employers are concerned about economic performance and viability in the face of an increasingly competitive local marketplace.  Staff or wages cuts which may be necessary to stay economically viable will almost certainly cause conflict with employees. Unions are concerned that poor performance in the business economy will cause higher unemployment and put workers current terms of employment at jeopardy, a potential cause of great conflict. Unions also fear that continuing measures by the state to reduce their powers will cause further falls in membership levels, mean reduced influence onto employers. Identifying the underlying causes of this widespread conflict is important as it allows management to determine what resolution approach to take. The causes of this conflict will generally fall into two broad categories, collective and individual reasons (Deery et al. 1998). Collective causes of conflict generally are to deal with an employee’s disagreement with the structural make up of their work environment. Examples of this are poor employee reward systems, limited work resources, poorly constructed policies and work requirements conflict. Edwards (1979) believes that the underlying reason in this category is because there is a strong conflict of interest between employers and employees. What is good for one party is frequently costly for the other. An example of this is management’s objective of maximising the level of effort that employees apply to their work while also attempting to minimise wage expenditure (Deery et al. 1998). Studies also suggest that if workers feel they are being underpaid and cannot take collective action, they may very well adjust their work effort down to match the wage (Deery et al. 1998; Edwards, 1979). These points strengthen the aim of this essay because the wage-effort trade off will continue to exist fu rther causing conflict amongst the employment relationship. The general approach to negotiation response to collective causes of conflict is through a process called collective bargaining. There are three main levels of collective bargaining in the Australian system: National level bargaining, industry level bargaining and workplace level bargaining (Macklin, Goodwin & Docherty. 1993). At the national level of bargaining, the Australian Industrial Relations Commission (AIRC) plays an arbitration  role in industrial relations matters which cannot be resolved at lower levels. Industry level bargaining occurs within a particular industry, generally between trade unions and employer associations, with both these parties representing their members. This level of bargaining can determine industry-wide agreements on terms of employment. In recent years workplace and individual bargain has become a more preferred method of conflict negotiation (Alexander & Lewer. 1998). This level allows individual employers and employees to bargain without the need for representatives. These different approaches to collective conflict negotiation allow employees and employers to come to some agreement in a fair and formal manner. Individual causes of conflict can be provoked by a large combination of issues. Biases and prejudices, inaccurate perception, personality differences, cultural differences, differing ethical beliefs, poor communication and lack of skill in conflict resolutions are all pieces that can make up a larger picture of organisational conflict. Robbins, Bergman, Stagg and Coulter (2003), found that there are 5 main techniques to reducing individual conflicts: forcing, collaborating, compromising, avoiding and accommodating. Which approach to use depends on the manger’s desire to be more or less cooperative and more or less assertive (Robbins et al. 2003). Not all conflicting situations are bad. Several authors have argued that, when the level of conflict is low or nil, internal work characteristics tend to be apathetic, stagnant, unresponsive to change and lacking in new ideas (Robbins et al. 2003, Lewicki & Litterer 1985). By directing conflict from a position of disagreement to an exchange of ideas, an environment of cooperation and trust is possible which can lead to mutually beneficial outcomes (DeChurch Marks, 2001; Van Slyke, 1997). References Alexander, R., & Lewer, J., (1998). Understanding Australian Industrial Relations (5th ed.). Sydney: Harcourt House, Chapter 7. Australian Bureau of Statistics. (n.d). Employee Earnings, Benefits and Trade Union Membership, Australia. Retreived September 1, 2003, from http://www.abs.gov.au/ausstats/abs@.nsf/lookupMF/88F55138D00A58E4CA2568A9001393B9 Australian Bureau of Statistics. (n.d). Industrial Disputes, Australia. Retreived September 1, 2003, from http://www.abs.gov.au/Ausstats/abs@.nsf/Lookup/490A908AFCBB9B06CA2568A90013936D Bamber , G. J., & Davis, E. M. (2000). Changing approaches to employment relations in Australia. In Bamber. G., Park. F., Lee. C., Ross. P. K. & Broadbent. K. Employment Relations in the Asia-Pacific, London: Business Press, pp. 23-45. Davis, E & Lansbury, R. D. 1993, ‘Industrial relations in Australia’, Bamber, G. and Lansbury, R. (eds) (2nd ed) International and Comparative Industrial Relations: a study of industrialised market economics, IRRC, Australia. pp. 100-12. DeChurch, L. A. & Marks, M. A. (2001). Maximising the benefits of task conflict: The role of conflict management. International Journal of Conflict Management, 12(1), 4-22. Retrieved August 27, 2003, from the ProQuest database. Deery, S., Plowman, D., Walsh, J & Brown. (2001). Industrial Relations: A contemporary Analysis (2nd ed.). Sydney: McGraw-Hill Edwards, P.K (1986). Conflict at work, Blackwell: Oxford. Encarta Encyclopaedia Deluxe (13th ed.). (2004). Redmond, WA: Microsoft. Hyman, R. (1984). Srikes. Great Britain: Fontana. Lewicki, R. J. and Litterer J. A. (1985). Negotiation, Homewood: IL. Macklin, R., Goowin, M. & Docherty, J. (1993). Workplace bargaining structures and processes in Australia. In D. Peetz, A. Preston. & Docherty, J. Workplace Bargaining in the International Context, Canberra: AGPS. Extracts, pp 3-12 Robbins, S. P., Bergman, R., Stagg, I., Coulter, M. (2003). Foundations of Management, (1st Ed). Sydney: Pearson Education Australia. Robbins, S. P., Bergman, R., Stagg, I. (1997). Management, Sydney: Prentice Hall. Van Slyke, E, J. (1997). Facilitating productive conflict. HR Focus, 74(4). Retrieved August 27, 2003, from the ProQuest database.

Benvenuto Cellini: The Man Who Made Art More Interesting

It seems that all of us are convinced by easy things, like how often people tell us that we can't have it all. It is always easier to believe that it is acceptable not to be able to draw because at least, we can sing. It is fine to not possess the skill for theater acting as long as we can dance. It is always easier not to have it all. Such idea can be counterattacked by not exactly mastering two art forms at a time. Disproving such claim is not achieved by trying to dance while singing even when singing just does not show in the blood and in the heart.To disprove such idea is simple: review history, especially the people who made it interesting. No one may ever be convinced with such argument – not until they meet a hooligan, a soldier, an author, a goldsmith, a sculptor, a musician and a painter rolled into one by the name of Benvenuto Cellini. Before introducing Benvenuto Cellini, it is best to pay tribute to his parents by recognizing them first. An artificer of musical in struments named Giovanni Cellini married a woman named Maria Granacci and settled in the Val d’Ambra.This couple had stayed together for a very long time, although it was only 18 years after their marriage when they were gifted with a child. Giovanni and Maria welcomed their third child Benvenuto in the family by giving him a name that, when translated in English, means â€Å"welcome. † As their child Benvenuto grew, the life of the Cellini family became more ideal for all of its members (Insecula, 2007). Born in Florence, Italy in November 1, 1500, Benvenuto’s family was also popular for being landowners in the Val d'Ambra.Three generations of Benvenuto’s family had settled in the Val d’Ambra. He was known for many different things. He was recognized for being a musician, soldier, painter and goldsmith (among his many other talents and skills) in the Renaissance Period (Insecula, 2007). Before Benvenuto was known as a sculptor, a musician or a wri ter, he was first inclined with his first love: metal works. Benvenuto was reluctant about being a musician because his heart feels for the arts of metal working even when his father, who had a strong inclination to music, wanted him to be a musician.Aside from being an artificer of musical instruments, music was also his father's talent. He wanted Benvenuto to develop this skill and kept his son away from metal works and design. Then again, Benvenuto stood up to follow his dreams and passion. His passion for metal work has indeed brought him to places and to more pedestals which his father, Giovanni, never expected (Insecula, 2007). Youthful likings got the better of Benvenuto. At fifteen, he grew up to be too ablazed by silver plates, vases and other decorative and significant elements produced from metal works.Giovanni, on the other hand, gave in because of the way Benvenuto had displayed his fondness for metal works. A goldsmith named Antonio di Sandro, who was more popularly kn own as Marcone, was where Giovanni sent his son for apprenticeship (NNDB, 2007). Benvenuto had definitely been successful with his craft. The place where he was native to recognized his skills as s goldsmith. However, Benvenuto was sent to Siena for six months for being involved in a fight with one of his colleagues. In Siena, he worked as a goldsmith for Fracastoro, also known as Francesco Castoro.As a goldsmith, he was also learning to play music at the same time. While mastering the art of playing the flute, Benvenuto moved to Bologna to be more successful in the goldsmith’s art. In Bologna, he was also recognized as a musician, specifically a flute player (NNDB, 2007). Benvenuto had been to many places. He had visited Pisa and resettled in Florence twice. At the early age of 19, he moved to Rome. He first tried and tested his skills on a silver casket. It was indeed successful and the people liked the way he worked.Because of this, he also produced silver candlesticks and made something for a living. Before Benvenuto knew it, he was also recognized by Pope Clement VII and made a vase for him. Today, one of his works can be seen in Vienna Museum called the â€Å"Leda and the Swan† where the said art was carried over for the Gonfaloniere Gabbriello Cesarino. The Leda of the Swan was famous for its being an artwork in a hard stone taking the wondrous image of Leda's torso and head (Gable, 2004). Undeniably, Benvenuto has established a name as a goldsmith not only in Italy but in history as well.On the other hand, Benvenuto, no matter how reluctant he was towards concentrating on a musical career, tried everything in his power to avoid making his father Giovanni feel bad and all the more frustrated. Since Benvenuto's father, Giovanni Cellini, was a musician, too, it can not be denied where Benvenuto got his skills in music from. Aside from being a goldsmith, Benvenuto had been known for being a musician even if it was not exactly his dream. Music , being his father's first passion, was also the art form his father encouraged him to study about all the time.The years where Giovanni had been trying to keep Benvenuto away from his family were also the same years when he tried to convince Benvenuto to concentrate music. He wanted Benvenuto to be known as a musician (The Harvard Classics, 2005). While Benvenuto loved metal crafts and art works, it never meant that he didn't have a space for music in his heart. Benvenuto did not deepen and worsen that frustratration of his father by focusing only on metal work and ignoring music and all its charms.However, Benvenuto was not as interested in music as he was in metal work and paintings. He was a man who knew how to play the flute and cornet but never fully concentrated on these skills. Benvenuto says that he would only play flute or cornet everytime his father was around, or simply because he wanted to please his father. Sometimes, he would play music and pretend to like what he was doing just so he would see his father happy. His father, on the other hand, would always cry in tears of joy everytime he hears the music Benvenuto played (Symonds, 2003).The reason why Benvenuto chose not to aggravate his father's frustration when it comes to music was because he was already frustrated with the other son. Benvenuto's brother, Cecchino, became a man destined to the profession of arms when Giovanni, their father, wanted him to become a jurist. Benvenuto was the son who pursued his own dreams and his father's, too, even when they were two different careers, two different talents, two totally different things. As a goldsmith, Benvenuto concentrated and learned two art forms at a time. When he was 15, he started learning about music, too.When he moved to places like Siena and Bologna, he spends his days as a goldsmith by playing flute at the same. In the said places, Benvenuto was recognized as a local flute-player. However, his inclinations towards music compared to h is inclination towards metal works are extremely different when it comes to the level of interest. Benvenuto had been taught by teachers, or what he regarded as â€Å"masters† about the basic things in metal works. He went through rigorous training and workshops to learn even the most complex and delicate side of the said craft.Benvenuto was recognized as a musician even when he did not undergo the trainings and workshops he had been through as a goldsmith. By watching people play, self-teaching and of course by accepting what such trait which he got from his father Giovanni, Benvenuto was able to succeed in this form of art, too (Insecula, 2007). He practiced playing the flute everyday and never skipped a day without practicing it even without the constant insistence of his father towards his learning of the said skill.It was not too long a wait when Benvenuto was recognized by the pope again. Benvenuto became one of the court-musicians of the pope (Panse, 2004). While some of uses are deeply convinced that still, we can't have most of it all, such idea was not something that Benvenuto bought. To Benvenuto, metal works was passion, music was a favor and sculpture was progress. His skills as a goldsmith later on developed to his interest in statues. Benvenuto did not grow up to have two careers. His talent as a goldsmith had later on evolved into a more serious craft: sculpture.As a sculptor, Benvenuto was able to come up with Mars, Vulcan and Jupiter silver statues which were famous for their large sizes. Jupiter can now be seen at the Detroit Institute of Arts (AARF, 2007). Benvenuto became more serious with this new craft and he paid great attention to this in the next years. He was able to come up with new statues in the 1540s. His great statues include Perseus with the head of Medua which he sculpted in 1545 to 1553 and The Nymph of Fontainebleau in 1542. Benvenuto had been very successful in his career as a sculptor that his works are displayed al l over the world.Some of the many world-renowned museums, institutions and art galleries that keep Benvenuto's statues are the following: State Museums of Florence and Palazzo Ruspoli both in Italy, Frick Collection and Metropolitan Museum of Art both in New York, Drawings from the Biblioteca Ambrosiana, Courtlauld Institute of Art in London, United Kingdom, National gallery of Austrialia in Canberra, Buenvenuto Cellini at the National Gallery Art in Washington D. C. , Benvenuto Cellini at the Louvre Musem in Paris, Kunsthistorisches Museum in Vienna and J. Paul Getty Museum in Los Angeles, California (Malyon, 2007)All these, Benvenuto definitely owes to a number of people. All his skills and talents and all the things he was recognized for – he owes it to his influences. Without his influences, he may not have known that such talents existed. He needed other people to help him realize his dreams. He needed his father's challenge to realize that he would rather be a goldsmith than a musician. He needed his teachers to train him and make him better with his talents and skills. He needed other great artists, too, and even the simple and most local ones, to give him an idea about other styles and techniques.